What are the types of conformal coating?

What are the types of conformal coating?

Types of Conformal Coating

  • Parylene (Type XY) Parylene is a common generic name for a unique series of polymers based on paraxylene.
  • Acrylic (Type AR)
  • Silicone (Type SR)
  • Polyurethane (Type UR)
  • Epoxy (Type ER)

What is IPC CC 830?

The IPC-CC-830C standard establishes qualification and conformance requirements for electrical insulating compounds (conformal coatings). It has been designed and constructed with the intent of obtaining maximum confidence in the materials with minimum test redundancy.

What is conformal coating on circuit boards?

A conformal coating is a thin polymeric film applied to a printed circuit board (PCB) in order to protect the board and its components from the environment and corrosion.

What is Mil I 46058C?

The MIL-I-46058C was developed to define a uniform set of test methods and performance requirements for conformal coatings and gives users confidence that the material they select will perform. Get a Free Sample. The MIL-I-46058C standard is managed by the Defense Logistics Agency (DLA).

What conformal coating is best?

Silicone Resin (SR) – Silicone conformal coating provides excellent protection in a very wide temperature range. SR provides good chemical resistance, moisture and salt spray resistance, and is very flexible.

How do you choose conformal coating?

Things to Consider When Choosing a Conformal Coating

  1. Low moisture vapor transmission rate.
  2. Low water absorption.
  3. Corrosion protection.
  4. Good electrical properties, such as dielectric constant, insulation resistance, dissipation factor, and dielectric breakdown voltage.
  5. Low outgassing.

Is conformal coating necessary?

Using conformal coating is absolutely necessary for your PCBs if you want to protect them from contaminants and dangerous environments. For instance, excess moisture can speed up decomposition, reduce insulation resistance and result in conductor corrosion.

How thick should conformal coating be?

between 1 to 5 mils
How Thick Should I Apply Conformal Coating? Conformal coatings are generally very thinly applied, which provides the best protection possible, but minimizes heat entrapment, excess weight, and other issues. Typically, conformal coating is applied between 1 to 5 mils (25 to 127 microns).

How do you remove PCB coating?

The three most common techniques for removal are chemical, thermal, and mechanical.

  1. Chemical Removal.
  2. Thermal Heat Removal. Two techniques are possible to remove a cured conformal coating depending upon the temperature sensitivity of the components located on the printed circuit board.
  3. Mechanical Removal.

Which coating protect PCB from moisture?


Pros Cons
CTE closer to epoxy PCB substrate Complex mix ratios
Good dielectric properties Potential for high stress during temperature cycling conditions
Good humidity resistance Difficult to rework and remove
High probability of reversion under temperature and humidity stress

How do I protect my PCB?

Applying the Best PCB Moisture Protection

  1. Perform lamination in a controlled environment.
  2. Ensure prepregs are moisture-free.
  3. Use meshed copper planes.
  4. Apply surface finishing.
  5. Baking.
  6. Apply coating.
  7. Store boards in moisture barrier bags.
  8. Follow IPC Guidelines.

Is conformal coating waterproof?

While conformal coatings can offer a moisture resistant layer of protection, most cannot be considered waterproof. Even if applied heavily, most coatings are semi-permeable, so allow some amount of moisture through. Conformal coating can, however, prevent current leakage or corrosion due to ambient moisture.

What is an IPC-CC-830 conformal coating?

Conformal coatings continue to be a vital part of the protection for electronic assemblies. The IPC-CC-830 (current and future editions) provide users a certain level of confidence that the coating will have the quality consistency, physical characteristics, and the protection levels required by today’s electronics.

What is the conformal coating standard?

This standard prescribes the requirements for the qualification and performance of electrical insulating compounds (conformal coating) for printed board assemblies. This standard prescribes the requirements for the qualification and performance of electrical insulating compounds (conformal coating) for printed board assemblies.

What is IPC-cc-830b?

The IPC CC-830 revision B was developed as a commercial alternative to the MIL-I-46058C specification which was made inactive in November 1998. When testing under IPC-CC-830B standards, the outcome is utilized as a confirmation that the coating meets the base performance level disclosed in the specification.

Are urethane conformal coatings chemical resistant?

Urethane (Polyurethane) Resin (UR) – Urethane conformal coatings are known for their excellent moisture and chemical resistance. They are both abrasion-resistant and solvent-resistant, which results in coatings that are very difficult to remove.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top