What size do rivet nuts come in?

What size do rivet nuts come in?

Rivet nuts typically can grip material thicknesses between 0.010” up to 0.500” thick, but no one rivet nut can cover that entire range!

What size is M3 rivet nut?


Diameter (d) Length (L) Grip Range
M3 9.0mm 0.5 – 1.5mm
M3 9.5mm 0.5 – 2.5mm

What can I use instead of a rivet nut?

Flowdrill offers a reliable alternative to Rivnuts also known as Blind rivet nuts by overcoming many of the challenges encountered by Rivnut users. A Flowdrill connection cannot spin in its hole; this results in less rework and a more reliable connection for you or your customer.

What size hole do I drill for 1/4 20 Rivnut?

About this item. Aluminum 1/4-20 rivet nuts body diameter:0.350″, application Hole Size:0.351″-0.356″, grip range:0.020″-0.120″.

What size hole do you drill for a 10 24 rivet nut?

10-24 Klik-Rivet Nut grip range (. 080-. 130) Steel – PKG

Type Rivet Nut
Length 0.594″
UOM each
Catalog Page BBV11, Page 01-303
Notes Drill Size: 1/4″

Can you use a regular rivet gun for rivet nuts?

Not exactly. If you have a rivet gun that has the proper insert dies to accommodate the rivnuts then you can. Otherwise you will have to purchase a rivet gun that contains the rivnut inserts that you choose to use. Each rivnut requires a tool die set to utilize them.

Can you install a rivet nut without tool?

To install rivet nuts without a tool, you will still need more than just your bare hands. You will also need a bolt that 1) has its own nut, and 2) can fit into the rivet nut. You should also have a washer or larger bushing that can fit around the bolt fairly tight.

What size hole do you drill for a 3/8 rivet nut?

You will need a 9/16” drill bit for 3/8” nutserts. 1 of 2 found this helpful.

What size hole do I drill for 1/4-20 Rivnut?


Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top