What angle should an awning be?
Awnings should have between a 30 and 50 degree angle, taking into consideration the height of the storefront and snow/wind load requirements.
How are awnings constructed?
Awning are extended coverings which can be attached to a building or freestanding. They are usually constructed from tubular steel or aluminum frames and covered with fabric. Mostly, awnings are custom manufactured and can be designed to fit most any architecture.
How far above a door should an awning be?
You will need to measure up the wall to where you’d like to have the awning – at least 7 feet and 6 inches. If you are planning to mount the cover above a door wall or window, you’ll need to add an additional 10 inches. Awning enclosures require a minimum clearance of 10 inches if mounting above an exit or entrance.
How do you lace an awning?
Hook the cord between the section of cord already laying along the awning and the pole, and bring it up and around the grommet. String the cord through the grommets, front to back, and continue to lacing until the awning is finished.
How do you adjust the slope of an awning?
With the provided hand crank, hook it into the adjustable pitch loop below the shoulder of the awning. As you twist the crank, the pitch will adjust. Adjust until the awning is at the desired height. Do not adjust the pitch more than 20 degrees per side from its factory setting.
How much pitch should an awning have?
Roché recommends a pitch of at least 14° for patio awnings, which is adequate for encouraging rain to run off the surface without compromising too much head height or shading. The pitch is fixed in place by your installer.
What material is best for an awning?
The most commonly used materials for awning fabrics include vinyl, acrylic, polyester and other natural fabrics such as cotton. However, acrylic and vinyl fabrics have proven to be the most effective and popular options thanks to their outstanding durability and weather-resistant properties.
What materials are awnings made out of?
Awnings can be made from acrylic or synthetic materials, or natural materials can be coated with acrylic or other synthetics to increase the lifespan and reduce maintenance needs. Synthetic and acrylic awnings tend to stand up to sun damage better than canvas awnings and are less susceptible to mold and decay.
How far can an awning extend?
Keough said, adding that while retractable awnings can range anywhere from 5 to 40 feet in width, the distance they can project out from a wall generally cannot exceed 14 feet.
How big of an awning do I need?
Ideally, your awning’s width should be the same as the width of your patio, deck or existing wall. In cases where the patio or deck’s width is extremely wide (over 24′), it is recommended either to partially cover the area or to have more than one awning installed to accommodate the entire area.