How much does a MasterTemp heater weigh?
specifications
| Item # | Description | Weight (LBS) |
|---|---|---|
| Item # 461001 | Description MasterTemp 200 ASME | Weight (LBS) 138 |
| Item # 460732 | Description MasterTemp 250 | Weight (LBS) 133 |
| Item # 460733 | Description MasterTemp 250 | Weight (LBS) 133 |
| Item # 460771 | Description MasterTemp 250 ASME | Weight (LBS) 120 |
How do I check the exhaust temperature on my MasterTemp?
If you hold down POOL or SPA button for at least 10 seconds it displays the exhaust temp. Normal temps should be ~290-350. Turn the heater on. The fan will come on for about 30 seconds, then you will hear a click, and the heater should fire.
What does a thermistor do in a pool heater?
An electronic temperature sensing thermistor in the manifold adapter inlet controls the heater operation. When the inlet water temperature drops below the temperature set on the operating control, the burner controller supplies power to the combustion air blower through a series of safety interlocks.
How much does a MasterTemp 400 weigh?
Product information
| Product Dimensions | 36 x 25 x 30 inches |
|---|---|
| Item Weight | 128 pounds |
| Manufacturer | Pentair |
| ASIN | B004VU87NW |
| Item model number | 460737 |
How long should a Pentair pool heater last?
You can expect a gas or heat pump pool heater to last 8 to 11 years, with an average of 10 years. Regular usage and maintenance is key to a longer lifespan.
What is the warranty on a Pentair Mastertemp heater?
While the majority of Pentair products are covered by a sixty- (60) day warranty, a select number of products qualify for extended warranty coverage.
How do you test a flue sensor?
1) Using a multimeter, set the device to resistance testing mode (The icon looks like a horseshoe). 2) Put each multimeter prong on the stack flue sensor terminals. If the resistance measures 0 it is bad, replace the stack flue sensor. 3.5 ohm or higher means the sensor is working.
What causes a pool heat exchanger to fail?
When this happens, calcium deposits build up inside the tubes over time. As a result, it is harder for water to pass through the heat exchanger freely, leading to clogging and the heater will not fire (for safety reasons) and causes the heater to fail.
How long should a commercial pool heater last?
Lifespan of Commercial Application Pool Heaters: Two major manufacturers of pool heaters stated that the typically life expectancy of one of these units is around 5 years.
How long do heat pump pool heaters last?
With proper installation and maintenance, heat pump pool heaters can last 10 or more years.
What makes the mastertemp 125 heater so special?
The MasterTemp 125 Heater provides energy-savings and advanced operating features that were only available from much larger heaters. With its revolutionary pre-mixed gas combustion technology, the MasterTemp 125 Heater offers 82% thermal efficiency, the highest in its class.
Why choose mastertemp?
Already known as being dependable and efficient, MasterTemp now offers smart features and an optional energy-saving automatic bypass to help you ensure your pool is ready whenever you are. Control System enables management of pool functions from across the yard or around the globe.
What does the et code 126 mean on a hot water heater?
The 126 is the normal code displayed at boot up of the heater. What temp is the ET set to? What temp does the ET say the water is? Is the heater also cranked all the way up to 104 on the spa setting? Normal boot up is 888, 128 and then r8 or r13. The numbers are displayed briefly and then go to water temperature.
What is the GPM range for a Pentair mastertemp 250?
I have a Pentair Mastertemp 250 heater that uses propane fuel. What is the GPM range that I should use when the heater is on? Thank you. Hello, for the MasterTemp 250, the minimum flow rate is 25 GPM and the maximum is 120 GPM.