How is a drop test performed?
A drop test is a test designed to examine the structural integrity of a product. Drop tests usually involve an object being dropped from a predefined height onto a second object or surface. The object being tested can be either the dropped object or the object/surface that an object is being dropped on to.
What is ISTA drop test?
ISTA 3A testing can evaluate the protective performance of a packaged product related to vibration, shock and stresses encountered during handling and transportation in a parcel delivery system. These test levels are based on general data and do not represent any specific distribution system.
What is drop test in packaging?
A drop test simulates the freefall of package on its corners, edges and surfaces. To achieve this the packaging is filled with the envisaged products and dropped from a defined height. This enables realistic conditions encountered during shipment to be simulated.
Why drop test is required?
Conducting this test is an essential step for distribution and marketing companies to ensure the safety of loads during transport. The main reason to carry out a package drop test is therefore to obtain information that allows designing a suitable packaging and securing the goods during transport.
How do you do a gas drop test?
How to carry out a Tightness Test with a Gas Test Gauge?
- Step 1 – Connect the Gas Test Gauge.
- Step 2 – Open the Supply Valve.
- Step 3 – Observe the Gas Test Gauge for 1 Minute.
- Step 4 – Slowly Open the Valve to 20mbar.
- Step 5 – Wait 1 Minute.
- Step 6 – Observe the Gas Test Gauge for 2 Minutes.
What is ISTA 1A testing?
ISTA Test Procedure 1A covers testing of individually packaged products weighing 150 lb (68 kg) or less when prepared for shipment. The test procedure consists of both vibration and shock, with the vibration test being fixed displacement. The shock test consists of drop, incline impact and horizontal impact.
Is standard for drop test?
ASTM D5276 – The most commonly referenced drop test, free fall impacts simulate containers of various sizes being dropped from different heights and orientations. Distribution standards such as ASTM D4169, ASTM D7386, ISTA 3A and ISTA 2A dictate these variables.
What is drop weight testing?
The drop weight test is a mechanical test, in which a defined weight falls onto a specimen from a specified height. Following the drop weight test the appearance of the fracture surfaces is evaluated. Here the proportions of the deformation fracture surface and brittle fracture surface are determined visually.
What is the ISO standard for drop test?
This part of ISO 7965 specifies a method of vertical impact testing on a filled paper sack by dropping.
Can you drop test?
The drop test or free fall test is one of the most applied tests in the industry of transport simulation and packaging optimization. This test allows us to know how a vertical drop can affect the integrity of the packaging and the goods inside.