How do you turn off the ABS light on a VW Polo?

How do you turn off the ABS light on a VW Polo?

Resetting Your ABS Dashboard Warning Light Step One: Disconnect the positive cable from your car battery. Then, hold down the brake pedal to drain the vehicle’s electrical system. This will result in a reset of the car’s central computer. Plug the cable back in to restore power.

What does the ABS light mean on VW Polo?

When your Volkswagen’s ABS service light is on, your antilock system has been deactivated due to a malfunction. Your vehicle’s regular brakes should be working just fine, but the ABS system that prevents your vehicle’s wheels from locking up during braking will not be.

How do you turn off the ABS light on a Volkswagen?

How to Erase ABS Light Trouble Codes on a VW

1. Loosen the retaining nut on the cable that runs to the VW’s negative battery terminal.
2. Slide the cable clamp off the negative battery terminal.
3. Wait one to two minutes. This will reset the ECU and begin the process of erasing the trouble codes.

How do you change a VW ABS sensor?

Chapters

1. VW GOLF 4 – ABS sensor / wheel speed sensor: step-by-step changement tutorial. 0:00.
2. Unscrew the wheel bolts. 0:24.
3. Unscrew the ABS sensor fastener. 1:18.
4. Detach the ABS sensor connector. 2:29.
5. Connect the ABS sensor wiring. 2:58.
6. Install the ABS sensor on the steering knuckle and secure it.
7. Screw in the wheel bolts.

Is it safe to drive my car with the ABS light on?

When your ABS light comes on it doesn’t mean your vehicle isn’t safe to drive from point A to point B. The car will still function as normal, it will start up just fine and drive how it always has and your brakes will work as well.

How much does ABS cost to fix?

An ABS control module replacement can range from $320 to over $1,000. The wide price range isn’t really driven by labor cost, which will typically be around $80-$120. It depends on how much the control module costs and how difficult it is to source.