How do you test a 48 volt Club electric motor?
Connect the positive jumper cable to the positive battery terminal on the 12-volt battery. Touch the other end of the positive battery cable to the A2 terminal on the electric motor. Once the positive battery cable touches the A2 terminal, the motor should start turning and the rear wheels should start turning as well.
How do you troubleshoot an electric club car?
There are a few simple problems that you can fix yourself that will not necessitate professional maintenance.
- Test the wall socket where you charge your cart.
- Expose your golf cart batteries.
- Test the batteries for voltage.
- Replace dead batteries.
- Expose the motor for inspection.
- Reset the motor.
- Test the cart.
How fast does a 48V club car go?
12MPH
Standard 36V and 48V golf carts are capable of the same top-end speed (12MPH). You can, however, make your golf cart go faster by doing a couple of things: Larger Tires – You can purchase larger tires.
How do you get a 12v off 48V golf cart?
Touch the red probe to the positive terminal of the battery and the black probe to the negative terminal. Read the voltage from the meter display. A reading around 10 to 14 volts comes from a 12-volt battery. Attach terminal connectors to two insulated wires and then connect one wire to each terminal on the battery.
How do I know if my electric golf cart motor is bad?
You have enough going on in your life without your golf car refusing to start when you turn the key in the ignition. If your golf car won’t start, is slower than it used to be, or is experiencing other technical problems, you could have a bad motor on your hands.
How do I reset my electric golf cart motor?
First, you’ll want to reset your motor. It should have a small reset button (Usually it will be red) located near the main battery supply. Hit the reset button and then put the cover back on the motor. The next step would be to recharge your cart and try turning it on again. If it starts up then you’re in luck!
How do you test a 48v solenoid on a golf cart?
Set your multimeter to ohms and insert a probe on each large terminal with the key off and the cart direction switch in the neutral position. Press on the accelerator with the cart’s movement control in the forward position, and the key is turned on. A click should be heard first from the solenoid.
How do you check the ignition switch on a club car?
Testing a Club Car Ignition Switch
- Find the back and red wires on the back of your battery pack.
- Connect the black wire to the negative terminal and the red to the positive.
- Keep the cart turned off while you work on it.
- Check the wires with a probe meter while the cart is off – only one wire should have a charge.
How do I make my 48V golf cart faster?
6 Ways You Can Make a Golf Cart Faster
- Add More Torque to Your Golf Cart.
- Upgrade Your Golf Cart’s Motor.
- Improve the High-Speed Controller of the Cart.
- Add Better Golf Cart Tires.
- Use a Higher Powered Golf Cart Battery.
- Watch the Weight in Your Golf Cart.
How far will a 48 volt golf cart go?
How Long Will a 48 Volt Golf Cart Run? A 48 volt golf cart, depending on its amperage can go from 12 miles to 35 miles.
How do you hook up a 48v golf cart battery?
The main positive lead for the battery bank coming from the frame of the cart will connect to the positive terminal of the first battery in the bank. Then, connect a cable from the negative terminal of the first battery to the positive terminal of the subsequent battery in the bank.
Can you use 4 12-volt batteries in a 48 volt golf cart?
For example, a typical 48-volt golf car may use eight 6-volt batteries, six 8-volt batteries, or four 12-volt batteries. Purchasing fewer batteries with a higher voltage is appealing because it reduces your upfront cost.