How do I reset my brother Toner HL 2130?

How do I reset my brother Toner HL 2130?

Brother HL2130 Toner Reset – TN2030

  1. Open the front cover and leave open while completing the following steps.
  2. Turn the printer off.
  3. Hold the ‘go’ button (or “start’ button) while turning the printer on.
  4. Release the ‘go’ button (or “start’ button).
  5. Press the ‘go’ button (or “start’ button) twice.
  6. Pause.

How do I bypass the toner on a Brother printer?

  1. Power on the Brother printer.
  2. Open the toner access door located at the front of the printer.
  3. Press the “Clear/Back” button.
  4. Scroll through the list of toner cartridges until you have located the one that is giving the “Replace Toner” message.
  5. Press the “1” button to reset the toner cartridge display.

How do you reset the toner on a Brother HL l2310d?

-Open the front cover. -Press and hold Go for about four seconds until all of the LEDs light up. Once all four LEDs are lit, release Go.

Why won’t my Brother printer recognize toner?

If you install a partially used toner cartridge, your Brother machine is unable to recognize toner consumption correctly which will cause this problem. Therefore, when you replace the toner cartridge, please use a brand new toner cartridge, not a partially used toner cartridge from another machine.

Why is my Brother printer saying no toner when there is?

The No Toner message appears if the toner cartridge or the toner cartridge and drum unit assembly is not installed correctly. Remove the toner cartridge and drum unit assembly. Remove the toner cartridge from the drum unit, and reinstall the toner cartridge back in the drum unit.

How do I reset my brother toner HL l2320d?

Resolution:

  1. Ensure the printer is turned off.
  2. Open the printer front cover.
  3. Hold the Go button while turning the printer on.
  4. When the Toner, Drum, and Error LEDs are on and the Ready LED is off, release the GO button.
  5. Press the Go button nine (9) times.
  6. Close the front cover.
  7. Press the Go button 5 times.

How do I reset my Brother HL 2140 printer?

Reset the settings to factory default

  1. Power the machine off.
  2. Press down the GO button and power the machine on.
  3. Keep pressing GO until the Toner, Drum, and Error LEDs are on.
  4. Release GO. All LEDs will be off.
  5. Press GO eight times. Your machine’s printer settings will be reset.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top