How do I fix ScanSnap scanner?
Please try the following steps to establish the connection:
- Restart your ScanSnap.
- Connect the USB cable directly.
- Turn-off antivirus software.
- Use another USB port.
- Use another USB cable.
- Disconnect other USB devices.
- Use ScanSnap Support Tool.
- Delete the device driver.
How do I reset my ScanSnap?
For the procedure to reset the ScanSnap settings, refer to the following:
- Press. in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
- Press. to display the [Scanner settings] screen.
- Press [Reset ScanSnap settings].
- Press the [Initialize] button.
Why won’t my ScanSnap connect to my computer?
If the icon status still indicates “Not Communicating”, unplug the USB cable from the computer or ScanSnap, wait 5 seconds and reconnect the USB cable. If you are using a USB hub, connect the ScanSnap directly to the computer by using a USB cable. Turn-off any antivirus software that is running.
Why is my ScanSnap ix1500 not working?
Turn off your ScanSnap, wait at least 5 seconds and then turn it on again. If the button status is not changed, unplug the USB cable from the computer or your ScanSnap, wait for 5 seconds, and then reconnect the USB cable. Connect the USB cable directly.
Why is the blue light flashing on my ScanSnap?
If you have successfully loaded the Snap Scan software, a flashing blue light indicates the device is getting ready to scan. Look for a message on your monitor that indicates SNAP SCAN Ready to Scan. Do not try to scan pages before getting that message. When ready to scan, the light should change to solid blue.
Why is my ScanSnap blinking orange?
Charge the battery.
How do I connect my ScanSnap to my laptop?
iOS, Android
- Start the ScanSnap Cloud application.
- Tap. on the main screen.
- Tap [Settings].
- Tap [Add wireless access point/router].
- Select a ScanSnap scanner that you add a wireless access point to.
- Enter the password for your ScanSnap account.
- Tap [Authenticate].
- Tap [Add wireless access point/router].
How do I connect my ScanSnap to my computer?
1 Connect the ScanSnap and a computer with a USB cable. 2 Open the cover (feed guide) to power on the ScanSnap, and turn on the Wi-Fi switch. 3 Go to Finder sidebar and select [Applications] > [ScanSnap] > [ScanSnap Wireless Setup Tool] to run ScanSnap Wireless Setup Tool.
How do I turn off ScanSnap ix1500?
Close the ADF paper chute (cover) of the ScanSnap to turn the power off. The ScanSnap is turned off by pressing the [Stop] button for more than 3 seconds until the power LED of the ScanSnap is turned off.
What does the orange light mean on ScanSnap ix500?
The ScanSnap Battery Indicator Was Flashing in Orange. The ScanSnap Battery Runs Out Fast. The ScanSnap Is Not Connected to the Network. Cannot change the access point to another one on the same network.
Why is ScanSnap flashing blue?
How do I update ScanSnap S500 software?
The online update function is not available for the ScanSnap S500 software. To convert scanned images to searchable PDF files, download the OCR Pack with the relevant language from the download page for ScanSnap Manager and then install it.
What should I do if my ScanSnap stops working?
1. Restart your ScanSnap. Turn off your ScanSnap, wait at least 5 seconds and then turn it on again. wait for 5 seconds, and then reconnect the USB cable.
Is ScanSnap software supported on Windows 2000?
End of ScanSnap software support for Windows 2000. Windows 2000 is not supported by ScanSnap software distributed after August 1st 2015, such as driver, scanning software, or update. The following table shows which ScanSnap software are available for download as complete versions.
Connect the USB cable directly. If your ScanSnap is connected via a USB hub, try connecting your ScanSnap directly to the computer via the USB cable. 3. Turn-off antivirus software.