How do I find the IP address of my axis camera?

How do I find the IP address of my axis camera?

Power cycle the camera, i.e. turn the power off and turn it back on. Start AXIS IP Utility. When the camera appears in the window, right-click it and select “Assign new IP address” and enter the IP address. Click the “Assign” button and follow the instructions.

How do I log into my axis camera?

To access your site from a remote location open up AXIS Camera Companion 2.0 and log in with the same MyAxis account as used on the local site. Select the remote site, type in the site password and press Enter. You should now be connected to the site.

How do I make my Axis IP camera default?

To perform a factory reset, do the following:

  1. Power down the camera.
  2. Hold down the control button, and with the button held down connect the power.
  3. Keep the CTRL button held down until the LEDs on the front of the camera displays amber (this could take up to 15 seconds).

How do I reset my q1786 Axis?

Reset to factory default settings Go to Settings > System > Maintenance and click Default.

How do I assign an IP address to my IP camera?

Configuring the IP address of the camera

  1. Open a web browser like Internet Explorer then enter the camera’s IP address in the Address bar.
  2. Enter your camera’s User name and Password then click OK.
  3. Click the Setup tab.
  4. Click Basic located at the left side of the page.
  5. Select the Configuration Type.

What is Axis camera default password?

Surveillance Brands – Default Username and Passwords

Brand User Name Password
Arecont Vision admin No Set Password
Avigilon admin admin
Axis root no set password
Basler admin admin

What is default password for Axis camera?

What is the IP camera activation password?

In earlier versions of the firmware (to version 5.3. 0) IP cameras HIKVISION supplied to IP address 192.0. 0.64 and the default password is 12345. Starting with version 5.3.

Are Axis cameras DHCP by default?

If you have a router or a DHCP server that handles the IP distribution, the Axis device just gets an IP in the network like any other device, so it does not use the default IP 192.168.

What is the default password for AXIS camera?

What is Axis default password?

The default username for your Axis router is root. The default password is pass.

How do I factory reset my AXIS m3045?

Reset to factory default settings It is also possible to reset parameters to factory default through the web interface. Go to Settings > System > Maintenance and click Default.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top