Are 3157 and 7443 the same?

Are 3157 and 7443 the same?

7443 is a totally different base(the part that plugs into the socket) than a 3157.

Will a 7443 bulb fit a 7440?

The point is that a 7443 bulb can be used to replace a 7440 bulb , 7443 just has extra contacts that contact nothing when installed in a 7440 socket therefore 7443 can perfectly be used as a replacement for a 7440. A 7440 bulb on the other hand can’t be used replace a 7443.

Does 7444na fit 7443?

All four bulbs are dual filament which means they are two light bulbs in one. 7443/NA is rated at 12 volts 21/5 watts and 7444/NA is rated at 13.5 volts 28/8 watts which means 7444/NA is supposed to be a little brighter.

Is 7443 bulb dual filament?

7443 is dual filament for our front parking/turn signal. 7440 is single filament for rear signals and sedan reverse lights.

Will a 3157 bulb work in 7443 socket?

Together, these advanced design features work to enhance the overall effectiveness of your vehicle’s LED output and long-lasting performance. This model is easily installed and features 1200 lumens per bulb. The 3157 Switchback LED Bulb also has increased cross-compatibility over the 7443 model for added convenience.

What vehicles have CK sockets?

Below is a list of confirmed vehicles that use CK style sockets:

  • 2008-2015 Scion XB brake lights.
  • 2013-2015 Ford C-MAX outer Brake/tail lights.
  • 2005-2010 Honda Civic COUPE (not sedan) Front Turn Signals.
  • 2010 Toyota Corolla front turn signals.
  • 2005-2015 Toyota Tacoma front turn signals.

What is a 7443 bulb used for?

The AUXITO 2600 Lumens 7440 7443 LED Bulbs are designed specifically for your reverse lights. These bulbs resemble the halogen bulb design and consume only a quarter of the energy of a traditional reverse light. These versatile lights can also be used to replace your parking or tail lights.

What is a 7440 bulb used for?

7440 bulbs and 7443 bulbs are commonly found as turn signal, tail light, and backup bulbs in Hondas, Chevrolets, Scions, VWs, Toyotas, and more!

What does na mean on light bulbs?

-NA stands for Natural Amber. -K stands for Krypton Gas which is used to make the bulb a LL(Long Life) bulb.

What is the difference between 3157 and 3157ck?

You may have noticed that your 3157 or 7443 replaced the bulb with a CK, SCK, SACK, SRCK. This means your vehicle uses a non-standard 3157 or 7443 bulb. Although they look the same in appearance, the difference is in the way the sockets are connected.

Can I use a 3157 bulb in a regular socket?

If you use a 3157 “CK” bulb in a socket that is wired for a conventionally wired 3157 led bulb, it will work properly in bright mode, but it will not light in dim mode. If you remove, rotate the bulb 180 degrees, and reinsert, it will not light at all.

Can I use a 7443 bulb in a 7440 socket?

In the 7440 socket, the 7443 will have extra contacts that are not connected to anything. The 7440 will not function in the dual bright dim mode in the 7443 socket. This can be seen in the wiring diagram below. The 7443 is a dual contact (d.c.) bulb (Shown left). The dual contacts are connected to 2 separate circuits inside the bulb.

Can I change a 3157 LED bulb to a srck?

As you can see from the diagrams, a regular 3157 led cannot be easily altered to make it into an SRCK: If you use a conventionally wired 3157 led bulb in a socket that is wired for the SRCK/SACK led bulb, the bulb will pop the fuse when the lights are switched on.

Why won’t my 3157 LED light bulb work?

If you use a 3157 “CK” bulb in a socket that is wired for a conventionally wired 3157 led bulb, it will work properly in bright mode, but it will not light in dim mode. If you remove, rotate the bulb 180 degrees, and reinsert, it will not light at all. You can test how your sockets are wired using a multi-meter.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top