Which HyperTerminal configuration setting should you use for the connection to the Cisco switch?

Which HyperTerminal configuration setting should you use for the connection to the Cisco switch?

To talk to a Cisco device, HyperTerminal must be configured on the right COM port and at 9600 baud. HyperTerminal can be used to telnet to devices, over the network, once they are configured.

What is my cisco WiFi password?

The default password of all Cisco routers is either “admin”, “cisco” or is a blank field. Once you input this account name and password, you should have no issue setting up your device securely.

How do I find the password for my cisco wireless router?

0.1 in your Internet browser. Log in with the following information: Username: cusadmin. Password: You can find this password printed on the white sticker on your Shaw Wireless Modem (Cisco), referred to as the S/N (usually a 9-digit number starting with 2xxxxxxxx).

How do I use HyperTerminal?

Using HyperTerminal

  1. Click your path depending on your Windows® operating system.
  2. In the Connect To window, enter a name, select an icon, and then click OK.
  3. Click the little arrow at the end of the line for Connect using:.
  4. Select the communications port being used for the console.
  5. Click OK.

How do I enter HyperTerminal commands?

Run MS HyperTerminal by selecting Start -> Programs -> Accessories -> Communications -> HyperTerminal. In the Connection Description dialog box, enter a name and choose an icon you like for the connection. Then click the OK button.

How do I reset my Cisco Catalyst 3750 password?

Password Recovery – Reset Procedure

  1. On a 3750-X switch, Power off the entire stack or standalone switch.
  2. Reconnect the power to the switch (standalone 3750-X or 3750-X) or stack master (3750-X stack only).
  3. Now initialize the flash file system, rename the startup configuration file (config.text) and boot the IOS:

How do I reset my cisco Catalyst 3560?

First you need to power down the switch. Once the switch is powered off, hold down the mode button, and power the switch on. The switch will boot up and you should see the switch prompt as shown below.

How do I reset the password on the 3560?

For 3560 Release the Mode button after approximately 15 seconds when the SYST LED turns solid green. When you release the Mode button, the SYST LED blinks green. A. Password recovery ( as per my knowledge 3 secs) Correct or Wrong? would switch configuration (startup + running)

What is a catalyst 3560 Kerberos server?

Note A Kerberos server can be a Catalyst 3560 switch that is configured as a network security server and that can authenticate users by using the Kerberos protocol. To set up a Kerberos-authenticated server-client system, follow these steps:

How do I set the Syst led to 2960 or 3560?

For 2960 Release the Mode button when the SYST LED blinks amber and then turns solid green. When you release the Mode button, the SYST LED blinks green. For 3560

What is the default password for a Cisco switch?

By default, no password is defined. • (Optional) For encryption-type, only type 5, a Cisco proprietary encryption algorithm, is available. If you specify an encryption type, you must provide an encrypted password—an encrypted password that you copy from another switch configuration.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top