What size is a WM2 rim?

What size is a WM2 rim?

The size of a WM2 rim is 2.72 inches.

What does JJ stand for on a wheel?

Helpful Expert Reply: The “JJ” that you mentioned finding on the wheel size listed for the units mounted to your trailer refer to the contour of the bead seat on the wheel, essentially its shape ( “J” indicates the shape of the letter J).

What does EH2 mean on wheels?

It was recommended that run-flats be mounted only on EH2 or EH2+ wheels, which have extra ridges to support the tire bead in case of air loss. Bingo. EH2 and EH2+ wheels have an extra lip that helps run-flats stay beaded at 0psi. Wheels that are EH2 and EH2+ doesn’t mean that they cannot run non-runflats.

What size is a WM3 rim?

Rim Size = WM3 (2.15″) X 19” X 40 Hole.

What size tire will fit my motorcycle rim?

Motorcycle tire width

Permissible Rim Widths Metric Standard Inch
2.15, 2.50, 2.75 120 4.75
2.50, 2.75, 3.00 130 5.00
2.75, 3.00, 3.50 140 5.50
3.50, 4.00 150 6.00

What is 7J rim size?

Rim Size. The rim labelling indicates the width in the first place as well. In 7J x 17 H2 ET38, 5×112 LK it is 7 inches. Now you have to know that a rim of this width fits on a tyre with a width of 195 to 225 mm.

What is Hubcentric rim?

Hub centric rings are rings that cover the spacing between the center bore of an aftermarket wheel to the hub of the vehicle. Hub rings are important because they secure the wheel in place and help prevent any type of vibration issue.

What is a Unilug wheel?

Wheels with Multiple Bolt Patterns. Uni-Lug wheels are a type of wheel that can fit more than one bolt pattern. Other types of wheels that fit more than one bolt pattern are called “Dual Pattern” or “Multi-Lug” wheels.

What does H2 mean on wheels?

the wheel hump
What does H2 mean? This markings stands for the wheel hump, it usually appears at the very end of the wheel markings. It corresponds to the rigidity of the wheel. There are several wheel humps out there.

What size Tyres fit 8.5 J rims?

Equivalency table

Rim width Minimum tyre width Maximum tyre width
8,0 Inches 215 mm 245 mm
8,5 Inches 225 mm 255 mm
9,0 Inches 235 mm 265 mm
9,5 Inches 245 mm 275 mm

How many rims do we make?

We have manufactured over 40,000 rims for customers on every continent in the world. We have a wide range of sizes available from WM1 X 16’’ to WM3 X 21’’ Rolled edge and 3.5” x 15’’ to 10.5” x 20’’ Drop centre.

Are your rims made in the UK?

We DO NOT import cheap rims from Asia, finish them off in the UK then stamp them Made in England, ours are made from raw material right here in Devon so truly are 100% MADE IN ENGLAND. Our Harley Davidson OEM replacement Wheel Rims are also individually hand welded and rolled.

Why choose Harley Davidson OEM replacement wheel rims?

Our Harley Davidson OEM replacement Wheel Rims are also individually hand welded and rolled. Generally available as Mirror Stainless Steel that looks as good as Chrome but without the risk of rust. “Most people can not tell the difference”. These are made to original patterns for a perfect fit and are also 100% MADE IN ENGLAND.

Are your rims the same profile as the original Dunlop/Jones rims?

Our ‘WM’ Classic rolled edge rims are currently the only rims available that are the same profile as original Dunlop / Jones rims from the Classic period. Every rim is individually welded and hand made to original patterns.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top