What is SSPC-SP?

What is SSPC-SP?

2) SSPC-SP 10 near-white metal blast cleaning (NACE No. 2) is a standard used for near-white metal blast cleaning put forth by the Society for Protective Coatings (SSPC) and NACE International Standard.

What is an SSPC standard for power tool cleaning?

SSPC-SP11- Power Tool Cleaning to Bare Metal This standard describes the requirements for taking a surface to bare metal, while ensuring a minimum surface profile of 1 mil (25 micrometers). It is used in situations where abrasive blasting is not possible or feasible.

Which SSPC standard is for industrial blast cleaning?

A1 FUNCTION: Industrial blast cleaning (NACE No. 8/SSPC-SP 14) provides a greater degree of cleaning than brush-off blast cleaning (NACE No.

What SSPC 7?

SSPC-SP 7/NACE No. 4 removes all visible oil, grease, dust, dirt, as well as loose mill scale but tightly adherent mill scale, rust, and the coating may remain.

What are SP for painting?

SSPC-Surface Preparation (SP)-1: Solvent Cleaning This method of surface preparation is meant to remove soluble substances from steel. Before a paint or other protective coating is applied, a solvent is used to remove all visible oil, grease, dirt, drawing or cutting compounds, or other soluble contaminants.

What SSPC 11?

SSPC-SP11 Power-Tool Cleaning to Bare Metal The standard requires the surface to be free from all visible oil, grease, dirt, dust, rust, coating, oxides, mill scale, corrosion products, and other foreign matter when viewed without magnification.

What is SP2 cleaning?

Removes all loose mill scale, loose rust, loose paint, and other loose detrimental foreign matter by hand chipping, scraping, sanding, and wire brushing. Prior to the use of hand tools, remove visible oil and/or grease by power or hand washing.

What is SSPC SP1?

SSPC-SP1. Solvent Cleaning is a method for removing all visible oil, grease, soil, drawing and cutting compounds and other soluble contaminants. Solvent cleaning does not remove rust or mill scale.

What is SSPC sp8?

SSPC-SP 8 is a surface preparation standard intended for acid pickling to be performed immediately prior to painting. As such, the standard includes elevated surface requirements that make sense if acid pickling is used as the primary method for cleaning and etching the steel surface prior to a coating application.

What SSPC 20?

SSPC-Paint 20, Zinc-Rich Coating, Type I-Inorganic and Type II-Organic. This specification covers two types of highly pigmented zinc-rich coatings that are uniquely defined by their capabilities for protecting steel exposed at film discontinuities such as narrow scratches and holidays.

What is sp2 cleaning?

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top