What is needed for LS VTEC swap?
- B18 or b20 non-VTEC block.
- DOHC VTEC head.
- Golden Eagle LS/VTEC assembly kit.
- ARP rod bolts.
- ACL bearings.
- APR head studs.
- New oil pump.
- GSR/ITR timing belt.
How much horsepower does a spoon engine have?
To die-hard enthusiasts, Spoon needs little introduction. The company has been tuning Honda cars for both racing and street use for nearly 20 years….Road & Track Speed Cars: Spoon S2000 Coupe.
|Spoon S2000 Coupe|
|Bore x stroke||87.0 x 90.7 mm|
|Horsepower||260 bhp @ 8500 rpm|
How much HP can a k24a handle?
The max flow on a K24 is rated around 37lbs/minute. You can expect about 370 hp at the crank (give or take) when the K24 is pushed to the limit. Of course you can try to push past this limit, but you will hit the point where you run into diminishing returns.
How do you install a VTEC head on a LS block?
Pro-Fab Designs brings you the VTEC conversion dowels that make cylinder head swaps a snap. Simply insert the dowels and install the new VTEC head on your LS/B20 Block.
How do I convert my Blox LS-VTEC/B20-VTEC to-6an?
BLOX LS-VTEC/ B20-VTEC Conversion Kit 1 Oil filter block adapter (sandwich plate) 2 3/4 Boss to -6AN fitting ; Head to -6AN fitting 3 Steel braided, Teflon coated oil feed line 4 Alignment dowel pins 5 1/8 NPT plugs
Is there a non VTEC block on a Honda S300?
Non-VTEC block w/ VTEC Head. The s300 version 3 is a plug in module to the OBD1 factory Honda Engine Computer (not included) which vastly expands the capabilities of the factory ECU. Forced induction, datalogging, real time programming, Bluetooth and engine protection are but a few of the comprehensive s300 features.
What is the thickness of a VTEC block?
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a viton rubber coating.Compressed thickness is .030″. Non-VTEC block w/VTEC Heads.Each