How do you reset Aqua Rite chlorine generator?
To reset, move the switch to ‘Off’ and then back to ‘Auto’. Wait for the relay to click (5 to 10 seconds). When the instant salt level is stable (and the negative sign still present), slide switch to ‘Super Chlorinate’ and back to ‘Auto’. It takes about 30 seconds for the unit to settle back on the default reading.
How do you calibrate a Goldline salt chlorinator?
Wait approximately 10 seconds (you will hear the relay kick on). The calibration screen will start counting down from a higher salt reading than what the actual level in the pool water is. Once you see your salinity level, push the switch up to “super chlorinate” and then immediately back down to the “Auto” position.
How do you reset a saltwater pool chlorinator?
Reset AquaRite Salt Chlorination Inspect Cell Light If the Inspect Cell Light is the only LED light flashing, then you can reset it by simply holding down the diagnostic button for 3 seconds, then release. The Inspect Cell indicator will now reset and will later come back on after another 500 hours of use.
Why is my salt generator not working?
Water flow The saltwater chlorinator needs a sufficient flow of water for effective operation. A dirty skimmer basket, clogged or dirty filter, and a clogged pump strainer, can cause insufficient water flow for the chlorinator to produce less chlorine.
How long does a Hayward salt cell last?
about five years
This is all possible thanks to your pool’s salt chlorine generator cell. With proper care, a cell will last about five years. Eventually, though, it will need to be replaced.
What should my salt chlorinator be set at?
around 3,000 to 4,000 ppm
Test and adjust your pool water’s salt levels If you’re using the Water TechniX Salt water chlorinator then you should try to aim for a salt level of around 3,000 to 4,000 ppm.
How long should I run my salt chlorinator?
Overall, you need to run your saltwater generator and pool pump for at least 8 hours daily. Not running either of these long enough means not enough chlorine to sanitize the water. Remember, the pool pump needs to be running simultaneously with the chlorine generator for the salt cell to produce chlorine.
How to calibrate a Hayward Goldline pool salt generator?
How to Calibrate a Hayward Goldline Aqua-Rite or Swim Pure Plus Pool Salt Chlorine Generator Step 1: Adjusting Salinity (Salt) level Before the chlorine generator can be calibrated correctly, the salinity—or salt… Step 2: Locating the Calibration Screen Once the salinity is adjusted to optimal
What is Aqua rite chlorinator?
Aqua Rite is the #1 selling electronic chlorine generator that eliminates the need to mix, measure and mess around with liquid or tablet chlorine and dramatically enhances the swimming experience. The #1 Selling Chlorinator in North America for the last decade, takes the worries and hassle of pool ownership, go with the recogized leader!
What should the salinity level be in a chlorine generator?
Rob is a pool-service industry professional with over 20 years of experience. Before the chlorine generator can be calibrated correctly, the salinity—or salt level in the pool water—will need to be at the correct level. For these systems, it should ideally be between 3200-3600 ppm (parts per million).
What is aquarite salt chlorination?
Designed for in ground pools up to 40,000 gallons, Hayward’s AquaRite Salt Chlorination System automatically converts salt into chlorine, naturally. You no longer have to worry about mixing, measuring or handling harsh liquid or tablet chlorine. The result is not “salty” ocean-like pool water, but rather a clean new experience.