How do I program my Toyota Sienna remote?

How do I program my Toyota Sienna remote?

How to Program Your Toyota Vehicle Remote

1. Turn your key in the ignition from “off” to “on,” and repeat within five seconds.
2. Within 40 seconds, close and open the driver door twice, and then insert and remove the key from the ignition one more time.
3. Again, be sure to perform steps one and two within 40 seconds.

How do you program a key fob for a 2012 Toyota Sienna?

PRESS and HOLD the LOCK button and hold for 2 seconds. RELEASE. The vehicle will respond by cycling the locks from LOCK to UNLOCK to indicate successful programming of the remote. REPEAT Step 7 for any additional remotes to be programmed, including working ones.

How do you program a remote?

Here is an example of likely steps:

1. Turn on your TV or another device you wish to control.
2. Press and release the DEVICE button on your remote associated with the product you want to control (TV, etc.).
3. Press the Device Button again, as well as the POWER button at the same time.
4. Release both buttons.

How do you program a keyless remote to your car?

Follow these steps to program a key fob at home:

1. Replace the batteries inside the key fobs.
2. Get inside the car.
3. Turn on the ignition.
4. Press the lock button on the remote key.
5. Listen for a Lock Sound.
6. Programming additional remotes.
7. Turn off the ignition.
8. Step out from your car and test the result.

How do I program my keyless 2 go?

Option 1:

1. Close all doors, then open driver’s door and press the Unlock button on driver’s door while it is open and insert key into the ignition.
2. Turn ignition from OFF to RUN 8 times within 8 seconds, with the 8th time ending in RUN.
3. Within 10 seconds press any button on the first keyless remote to be programmed.