How do I configure my adsl2+ modem router?

How do I configure my adsl2+ modem router?

Connect the Modem-Router’s power cord into the back of the Modem-Router. Connect a telephone cable from the wall into the back of the Modem-Router. Find your new networking cable (it came in the box with your Modem-Router) and connect it to one of the LAN ports on the back of the Modem-Router.

How do I configure my modem router?

Power on your router and computer first and then modem.

  1. Log into the router’s web-based management page.
  2. Configure WAN Connection Type.
  3. Enter your PPPoE username and password which are provided by your ISP.
  4. Click Save to save your settings, then the router will connect to Internet after a while.

How do I install TP-link adsl2+ modem router?

Normal Internet usage does not require this setting to be configured.

  1. Open the web browser and type the IP address of the device in the address bar (default is 192.168.
  2. Click on Advanced Setup->Routing, and you will see the routing information in the next screen.
  3. Click ADD ROUTE button to add a new route and then Save.

How do I configure my ADSL modem manually?

How do I setup my ADSL Ethernet modem for Internet access?

  1. Type – Set the connection Type to PPPoA (asused in the UK)
  2. Name – Type in the name for theconnection.
  3. Encapsulation – set the encapsulation asrecommended by your ISP.
  4. Username – Type in the ISP login username.
  5. Password – Type in the login password.

How do I install Netgear n300 wireless adsl2+ modem router?

Connect a computer. You can use an Ethernet cable or connect wirelessly. For a wired connection, use an Ethernet cable to connect your computer to an unused yellow Ethernet LAN port on your modem router. To connect wirelessly, use the preset wireless security settings on the label on the bottom of the router.

How do I log into my ADSL router?

Open your preferred web browser and type in the LAN IP address of your wireless ADSL router in the address bar, and press Enter. The default IP address for all TP-Link ADSL routers is 192.168. 1.1. Once at the login page, type in the username and password.

What is PPPoE username and password?

Point to Point Protocol over Ethernet (PPPoE) is a type of broadband connection that provides authentication (username and password) in addition to data transport. Most DSL providers use PPPoE to establish Internet connections for customers.

How do I configure my TP-Link router?

  1. Step 1: install the TP-Link Tether app.
  2. Step 2: connect your router.
  3. Step 3: connect to the Internet with the new router.
  4. Step 4: open the Tether app and log in.
  5. Step 5: adjust router settings.
  6. Step 6: save everything and connect to the Internet.
  7. Step 7: link to your TP-Link Cloud.

How do I setup my tp-link modem?

How to connect the TP-link Cable Modem?

  1. Connect the coaxial cable to the cable modem.
  2. Power on your cable modem.
  3. Connect your computer to the modem with an Ethernet cable.
  4. Wait about 15 minutes for the cable modem to synchronize with the Internet service provider’s (ISP) server and make sure the following LEDs are on.

How do I configure my ADSL router as an access point?

How to setup a TP-Link DSL modem router as an Access Point?

  1. Log into the router using or the default IP address 192.168.
  2. Click Advanced on the top navigation bar, then select Wireless on the left panel.
  3. Click Advanced > Network > LAN > DHCP Server.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top